BOOK NO.22118
Edition 1.4
\l
3000x
2000r
1000r
lnstruction
Parts
and
List
v
Straigffi
lhife
Cutting
Machine
with Flexi-band Sharpener
(Modet
A)
SABRE
SABRE
SABRE
MACHINE
SERIAL NO.
.
O 1993 H.
MAIMIN
CO.,
INC
IMPORTANT SAFETY
INSTRUCTIONS
When using
your
cutting
machine, basic safety
instructions should always be
followed including
the follo-wing:
This
cutting
machine isfor commercial
use only. Read all instntctions
beforc
using.
DANGER--"reduce
the risk of electric
shock;
1. Do
not install or store this
machine in
a
wet location.
WARN I NG-*
reduce the risk of burns,
fire, electric shock, or injury to
persons:
1.
Use
machine only
for its intended use as a
portable
cutting machine.
2. Turn machine to
*OFF'
(O)
before connecting
or disconnecting
power
cord.
3. Connect this
machine to a
properly grounded
outlet only. See Grounding
Instructions.
4. Always
disconnect
electrical connector
from machine
when not
using
it,
before servicing
it, or
changing
blade.
5.
Do not leave machine unattended
while it is connected
to
power
outlet.
6.
Do not operate
machine with a damaged cord or
if machine has been dropped. Do not disassemble
take to a
qualified
serviceman for
repairs. Incorrect assembly can cause electric shock when the
machine is
used.
7. Keep
hands
and
fingers away from blade and
moving
parts.
8.
Keep
guards
in
place
and
in
working order.
9.
The knife key and other
wrenches must be
removed from machine before starting motor.
10. Keep ventilation openings of
machine free from dust and
lint.
11. Keep machine clean and
blade sharp for best and
safest
performance.
'
Save
These lnstructions
H. MAIMIN CO.,
lNC., P.O. Box 549
-
Route 341, Kent, Gonnecticut 06757, U.S.A.
U
To Next Page
Need help?
General