BOOK
NO.
22118
Straight
Knife
Cutting Machine
with
Flexi-band Sharpener
(Mode/A)
SABRE
30000
SABRE
20000
Instruction
and
Parts
List
I MACHINE
SERIAL NO.
It
2000
H.
MAIMIN CO., INC.
IMPORTANT SAFETY INSTRUCTIONS
Edition 1.5
When
using your cutting machine, basic safety instructions should always be followed including
the following:
This cutting machine is
for
commercial use only.
Read
all instructions before using.
DANGER-To
reduce the risk of electric shock;
1.
Do
not install or store this machine
in
a wet location.
WARN J N
G-
To
reduce the risk of burns, fire, electric shock, or injury
to
persons:
1.
Use machine only for its intended use as a portable cutting machine.
2.
Turn machine to
"OFF"
(0)
before connecting
or
disconnecting power cord.
3.
Connect this machine to a properly grounded outlet only. See Grounding Instructions.
4.
Always disconnect electrical connector from machine when not using it, before servicing it, or
changing blade.
5.
Do
not leave machine unattended while
it
is
connected to power outlet.
6.
Do
not operate machine with a damaged cord or if machine has been dropped.
Do
not disassemble
take to a qualified serviceman for repairs. Incorrect assembly can cause electric shock when the
machine
is
used.
7.
Keep hands and fingers away from blade and moving parts.
8.
Keep guards in place and
in
working order.
9.
The knife key and other wrenches must be removed from machine before starting motor.
10.
Keep ventilation openings of machine free from dust and lint.
11.
Keep machine clean and blade sharp for best and safest performance.
Save These Instructions
Maimin Technology, 2915 Courtyards Dr., Bldg. B, Norcross, GA 30071 USA
Tel: 770.447.1800,Toll Free USA: 800.243.4645, Fax: 770.447.1070, Email: sales@maimin.com
From the library of: Superior Sewing Machine & Supply LLC
To Next Page
Need help?
General