Major tech MTD90 - Scanning for a DCS code; Call Tones

To Next Page

To Previous Page

Page 12

MTD90

LICENCE FREE 2-WAY RADIOS

• If you press the PTT - button while listening to a found CTCSS

code, the PMR will go back in stand-by mode on the channel with

the CTCSS code.

• If no CTCSS code is detected there is a chance that DCS is

selected by the user. In this case you can scan for the DCS code.

(section 13.10.3)

If you press the PTT - button 12 while listening to a found DCS code, the

PMR will go back in stand-by mode on the channel with the DCS code.

The MTD90 has 15 call tones

PTT