MAJORITY FITZWILLIAM - FM Radio Tuning

24
Instrucons Guide
FM Radio
Press the ‘Mode’ button on the unit (Ref.) or on the remote
(Rem.14) repeatedly to scroll through to FM mode.
Ensure that the antenna is screwed on and connected to the
DAB/FM antenna port at the back of the system (Ref.), and
then fully extended.
On rst use of FM radio, the FM frequency “87.5 MHz” will display
on the screen. To initiate an automatic scan up the bandwidth
to the next available station, press down the Navigation/OK
dial (Ref.) or the OK button (Rem.18) on the remote control.
Continue to do this to scroll through available stations.
Use the Navigation/OK dial to scroll slowly through the
frequencies. Scroll clockwise to manually scroll slowly up the
bandwidth and scroll anti-clockwise to manually scroll slowly
down the bandwidth.
Alternatively, use the up/down buttons on the remote
(Rem.7/19) to manually scroll up and down the bandwidth
slowly.