What to do if the CD player on my MAJORITY Receiver is not working?
V
Virginia WilliamsJul 28, 2025
If your MAJORITY Receiver CD player isn't working, ensure you are in CD mode, then press the eject button. Gently insert a CD, and the player should automatically load and begin to play it. Avoid pressing any remote buttons during this process.
S
Sonya WolfAug 1, 2025
How to resolve function disturbance on MAJORITY HOMERTON?
C
Carolyn TaylorAug 1, 2025
If your MAJORITY Receiver is experiencing function disturbances, switch off and unplug the unit, wait for about 2 minutes, and then switch it back on. If the issue persists, perform a factory reset and rescan for stations.
R
Robert RamirezAug 6, 2025
How to troubleshoot a MAJORITY Receiver with no power?
V
victoriathompsonAug 7, 2025
If your MAJORITY Receiver has no power or function, check whether the power is switched on at the wall and whether the power adapter is properly connected to the power outlet.
K
Kelly MartinAug 11, 2025
Why is my MAJORITY Receiver Bluetooth not connecting?
M
mortonoliviaAug 11, 2025
If your MAJORITY Receiver's Bluetooth isn't connecting, make sure that both the radio is on Bluetooth mode and the Bluetooth on your device is switched on. Then, select the Bluetooth device ‘Majority Homerton’ to play audio.
T
Tyler BaileyAug 17, 2025
What to do if my MAJORITY Receiver has no sound?
E
Elizabeth RoyAug 17, 2025
If your MAJORITY Receiver isn't producing any sound, verify that the unit isn't set to MUTE and that the correct MODE is selected. If connected via Bluetooth or AUX, increase the volume on your device. Also, check that all cables are properly installed.
M
Mr. Jesus NguyenAug 21, 2025
How to fix MAJORITY HOMERTON Receiver WiFi not connecting?
T
Thomas GarciaAug 21, 2025
If your MAJORITY Receiver isn't connecting to WiFi, ensure WiFi mode is selected in settings and the correct passcode is entered for your WiFi modem. You can also try connecting to the WiFi manually and via WPS. If problems persist, reset your WiFi modem or perform a factory reset and try reconnecting.