18
CD Player
Instrucons Guide
Select ‘CD’ on the main display screen by turning the Navigation
dial and pressing down the dial (Ref.) or select with the remote
navigation buttons.
The display screen for the CD function will now show “Reading...”
followed by “No Disc”. Insert your CD slightly and the drive
will take the CD into the system to play (Ref.). If it does not
automatically do so, select the Open/Close CD function on the
radio (Ref.) or on the remote (Rem.11).
The rst song on the CD will now begin to play and album
artwork will display on the screen. Please note that not all CDs
will display album artwork.
CD Functions
To skip between songs, use the ‘<’ or ‘>’ buttons on the radio
(Ref./6) or on the remote (Rem.8/17). Pause/Play using the
button on the radio (Ref.) or on the remote (Rem.15).
To skip rewind/forward through a song playing, hold down
the ‘<<’ or ‘>>’ buttons (Ref./13) on the unit or on the remote
(Rem.4/5) and release when you wish to stop skipping.
To eject the CD, press the Open/Close CD function on the radio
(Ref.) or on the remote (Rem.11).
Press the ‘Stop’ button on the unit (Ref.) or on the remote
(Rem.14) to stop the album. This will also display how many
songs are on the album and total playing time. Press ‘Play/Pause’
to begin listening again (Rem.15).
To Next Page
Loading...
Need help?
General
