26
In DAB/DAB+ mode, press the MENU button on the unit (Ref.)
or on the remote control (Rem.6) to open DAB/DAB+ settings.
Use the Navigation/OK dial (Ref.) or the Up/Down buttons on
the remote control (Rem.7/19) to scroll through the following
options:
Scan Setting
Select whether you would like to scan for all stations, or for
stations only with strong signal. Once selected, the screen will
display “Strong stations only?”. To scan only for stations with
strong signal, select “YES” with the Navigation/OK dial or the OK
button on the remote.
Audio Setting
All stereo stations are reproduced in stereo; for weak stations
this can result in poor audio quality. The audio quality in FM
mode can be improved by using mono.
Select whether to listen to the audio in stereo or mono. Once
selected, the screen will display “Listen in Mono only?” to listen in
Mono, select “YES”. To listen in Stereo, select “NO”.
System Settings - Select option to open system settings. Further
guidance on these options can be found from page 33.
Main Menu - Select to open available modes on the system.
Scroll through using the Navigation/OK dial or the buttons on
the remote, and select your chosen mode to play from.
Instrucons Guide
FM Radio Settings
To Next Page
Loading...
