30
Instrucons Guide
Dual Alarm Setting
Setting Alarm 1/Alarm 2
To set an alarm on your radio, select the ‘Alarm’ button on the
remote control (Rem.12) or select the ‘Menu’ button on the unit.
Select ‘Main Menu’ and select ‘Alarms’ to open alarm settings.
After selecting the alarm setting, select Alarm 1 or Alarm 2 with
the navigation dial (Ref.) or OK button on the remote (Rem.18)
to begin setting the following alarm functions:
Enable: Select to choose the regularity of your alarm between
Daily, Once, Weekends and Weekdays. If “Once” is selected, the
date and time of the alarm will need to be set here. Select ‘O’ to
turn o the alarm.
Time: The hour digits of the alarm will now begin to ash.
Change the alarm hour with the Navigation dial or Up/Down
buttons (Rem.7/19). Once on the chosen alarm hour, press
down the dial or the OK button to conrm. Follow the same
process for setting the alarm minutes.
Mode: Select between the following alarm wake-up tones:
Buzzer, Internet radio, DAB and FM.
Preset: If internet, digital or FM radio is selected as your alarm
tone, your last listened to station on this mode or one of your
preset favourites can be set as your alarm tone.
Volume: Use the Navigation dial or Up/Down buttons on the
remote to scroll to the desired alarm sounding volume. Select
the volume by pressing down the dial or the OK button.
Save: Once the above features have been set for the alarm,
select ‘Save’ with the Navigation dial or OK button to conrm.
Once set, an alarm icon will display on the standby screen.
To Next Page
Loading...
