MAJORITY FITZWILLIAM - System Settings Configuration

33
System Settings
Instrucons Guide
Access system settings by pressing the MENU button on
the unit (Ref.) or on the remote control (Rem.6) Scroll to
‘System Settings’ and select this option. Use the Navigation/
OK dial (Ref.) or the Up/Down buttons on the remote control
(Rem.7/19) to scroll through the following options:
Equaliser
Choose between a variety of equaliser settings that improve the
sound quality of the audio type/genre. Normal is selected as the
default. Can also be accessed by pressing the ‘EQ’ button on the
remote (Rem.3).
Select “My EQ Prole Setup” to set your own equaliser. Select
Bass or Treble and alter with the Up/Down buttons or the
Navigation dial. Once modied, press the ‘Back’ button (Ref.)
or (Rem.16) and the screen will display “Save Changes?”. Select
“YES” to save “My EQ” and select it as your option under Equaliser
settings.
Network - Select to open Network setting options. Once
selected, the following settings options will display:
Network wizard - Select to begin a scan for available Networks
to connect to.
PBC Wlan setup - Select option to start a scan for available
networks via WPS. Press the WPS button on your WiFi modem
to connect to the device.
View settings - If connected to a network, select to view
current connected network information.
Wlan region - Select between Europe or Australia as your Wlan
region.