MAJORITY FUL-DAB-BLK - FM Radio Operation; FM Scan Settings

Instrucons Guide
FM Radio
Press the ‘Mode’ button (Ref.3) multiple times to switch between
DAB, FM, Aux-in and Bluetooth. The rst time you do this, the FM
frequency “87.5 MHz” will be displayed on the screen.
Fully extend the antenna (Ref.15).
To auto scan, press and release the ‘Scan/Pair’ button (Ref.5).
This will start scanning up the frequency band and play the rst
station it nds with a strong signal.
To scan down the frequency band, press and hold the ‘Scan/Pair’
button (Ref.5) for a few seconds.
The radio will display station information when you press the
‘Info’ button (Ref.4). Press multiple times to view all information
available (See page 13).
FM Scan Setting
Choose between scanning strong and weak signals (All) or only
the strong stations (Only).
Press and hold the ‘Info’ button (Ref.4). To make your choice, use
the ‘Select’ dial (Ref.7) to choose your option.
Select “Scan Setting” and press the ‘Select’ dial (Ref.7). Use the
‘Select’ dial (Ref.7) to choose between “All” or “Only”. Press the
‘Select’ dial (Ref.7) to conrm your choice.
9