What to do if the CD is not playing or skips during playback on MAJORITY QUADRIGA Stereo System?
If the CD is not playing correctly on your MAJORITY Stereo System, make sure the device is in CD mode. Check if the CD is faulty or incorrectly inserted, ensuring the labelled side faces upwards. If the CD is dirty, clean it or try another CD.
Why is there no signal or hiss in DAB/FM mode on my MAJORITY QUADRIGA?
If you're experiencing no signal or hissing in DAB/FM mode on your MAJORITY Stereo System, check the antenna installation and reposition the antenna. Try adjusting the antenna's length. As well as, try moving the radio to another location.
What to do if the alarm does not work on my MAJORITY Stereo System?
If the alarm on your MAJORITY Stereo System isn't working, first ensure that the alarm is switched on. If the volume is too low, refer to the solutions for 'No sound'. Also, if the alarm source is set to a station but there's no network connection, either change the alarm source or reconfigure the network connection.
What to do if USB driver or MP3 player is not detected by MAJORITY QUADRIGA?
If your MAJORITY Stereo System isn't detecting the USB driver or MP3 player, verify that the USB driver or MP3 player is properly plugged in. Some USB hard disks require an external power supply, so ensure it's connected. Note that not all MP3 players can be directly read by the device; try using a USB drive instead.
What to do when the normal function of the MAJORITY QUADRIGA is disturbed by strong Electro-Magnetic Interference?
If strong electro-magnetic interference disturbs the normal function of your MAJORITY Stereo System, reset the product to resume normal operation by following the instruction manual. If the function doesn't resume, try using the product in another location.
What to do if no station is found on MAJORITY QUADRIGA?
If your MAJORITY Stereo System is not finding any stations, check the network, access point, and firewall. The station may also be temporarily unavailable, so try again later.
What to do if the link of manual added station may not be correct on MAJORITY Stereo System?
If the link of a manually added station on your MAJORITY Stereo System may not be correct, check and change it.
General| Type | Stereo System |
|---|---|
| Connectivity | Bluetooth, USB, AUX |
| Display | LCD |
| Remote Control | Yes |
| Alarm Clock | Yes |
| Radio | FM |
| Streaming Services | Spotify Connect |
| Power Supply | AC |
Overview of the front panel of the device.
Overview of the back panel of the device.
Instructions for connecting and positioning the antenna.
Guide for initial device setup, including language and network.
How to configure the date, time, and time format.
Steps to connect the device to a wireless network.
Information on saving and recalling radio presets.
Details on using the UNDOK app for remote control.
Configuration options for DAB radio, including DRC and station order.
Configuration options for FM radio, including scan settings.
How to adjust audio equalization settings.
Detailed network configuration options and management.
Setting and configuring the device's time and date.
How to change the device's display language.
Instructions for restoring the device to its default settings.
How to check for and install software updates.
How to launch the initial setup wizard again.
How to view firmware version and radio ID.
General safety precautions for using the device.
Precautions and guidelines for using compact discs.
Safety instructions related to the power adapter.
Warnings and advice regarding listening at high volumes.
Instructions for cleaning and maintaining the device.
To Next Page
