11
EN
Instructions Guide
Station Information (Info.)
The Station Information will show further information that is being
broadcast.
1. To view Station Information, press INFO button.
2. The following information will be shown on display:
Service Station service title
Sources Source (DAB+ / FM) that is being broadcast
If more than one source is available:
1. Press SELECT button, then press
w
/
s
buttons to
choose the preferred source (DAB / FM).
2. Press SELECT button to conrm selection.
PTY Programme type that is being broadcast
Freq FM frequency or DAB channel dependent on source
Bitrate Bitrate for a digital source (“0kbps” displayed for FM source)
Signal Signal strength expressed as a percentage
Prune Invalid
This function allows you to delete all the stations which are invalid or in very
poor reception in Station List.
1. To perform pruning invalid stations, press MENU button to access
menu.
2. Press
w
/
s
buttons to select Prune Invalid, then press SELECT button
to conrm.
3. Press the
7
/
8
buttons to select [Yes] for deleting invalid stations; Or
select [No] to cancel. Then press SELECT button to conrm selection.