MAJORITY Robinson 2DAB - Dab+ Mode Operation

13
EN
Instructions Guide
DAB+ MODE OPERATION
To switch the unit to DAB+ mode, press MODE button repeatedly.
When you switch to DAB+ mode for the rst time, the unit will automatically
perform initial scan.
While scanning, the display will show “Scanning...” and a progress bar
which indicates the scan progress and the amount of found stations.
After the scan has completed, all the found DAB+ stations will show in DAB+
Station List. The rst station will be selected automatically.
DAB+ mode is available only when BestTune set OFF. Please refer to
BestTune section for setup.
Station List
1. Press MENU button to access menu.
2. Press
w
/
s
buttons to select Station List, then press SELECT button to
conrm.
3. A list of DAB stations will show on the display.
DAB Scan
The DAB Scan will search for the entire DAB+ Band III channels.
1. To perform DAB Scan, press SCAN button.
Alternatively:
1. Press MENU button to access menu.
2. Press
w
/
s
buttons to select DAB Scan, then press SELECT button
to conrm.
2. The display will show “Scanning...” and a progress slide bar.
3. All the stations that have been found will be stored automatically. To
explore and listen to the found stations, press
w
/
s
buttons to select
and then press SELECT button to conrm selection.