MAJORITY Robinson 2DAB - Page 16

16
EN
Instructions Guide
Station Information (Info.)
The Station Information will show further information that is being
broadcast.
To view further information broadcast by the station, press INFO button, the
display will show the following information:
Service Station service title
PTY This describes the programme type that is being
broadcast.
Freq FM frequency.
Signal Signal strength expressed as a percentage.
Scan Setting
This function allows you to scan all stations, or stations with strong signal
only.
1. To perform Scan Setting, press MENU button to access menu.
2. Press
w
/
s
buttons to select Scan Setting, then press SELECT button
to conrm.
3. Press
w
/
s
buttons to select [Strong Stations Only] or [All Stations],
than press SELECT button to conrm selection
Audio Setting
This function allows you to search for stereo or mono stations.
1. Press MONO/ST. button to switch between Mono or Mono/Stereo
playing.
Alternatively:
1. Press MENU button to access menu.
2. Press
w
/
s
buttons to select Audio Setting, then press SELECT
button to conrm.