22
EN
Instructions Guide
Language
1. During System Settings, press
w
/
s
buttons to select Language, and
then press SELECT button to conrm.
2. Press
w
/
s
buttons to select your preferred language, then press
SELECT button to conrm selection.
Factory Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you have reception
problems, you may want to reset and try again. If you move to another part
of the country and pick up the local and national DAB stations in that area,
your previously tuned channels may no longer be available.
1. During System Settings, press
w
/
s
buttons to select Factory Reset,
and then press SELECT button to conrm.
2. Press
7
/
8
buttons to select [Yes] for factory reset; Or select [No] to
cancel. Then press SELECT button to conrm selection.
After factory reset, all the tuned DAB / FM stations, and DAB / FM
preset stations will be erased.
Software Version
1. During System Settings, press
w
/
s
buttons to select Software Version,
and then press SELECT button to conrm.
2. The software version will show on display.
Backlight
Press DIMMER button to change the backlight in High / Medium / Low / O
level.