Need help?Do you have a question about the Make Noise MATHS and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Width | 20 HP |
| Function | Envelope Generator, LFO |
| Inputs | 4 |
| Power Consumption | +12V: 70mA, -12V: 70mA |
Warning about electrical safety during installation procedures.
Direct coupled input for processing signals and control voltages.
Gate or pulse input to trigger circuit functions like envelopes.
Button to enable self-oscillation (LFO) or repeating voltage functions.
Adjusts the time for the voltage function to ramp up.
Linear control signal input for adjusting the Rise parameter.
Sets the time for the voltage function to ramp down.
Controls scaling, attenuation, and inversion for Channel 1 signal.
Controls scaling, attenuation, amplification, inversion for Channel 2.
Controls scaling, attenuation, amplification, inversion for Channel 3.
Controls scaling, attenuation, and inversion for Channel 4 signal.
Outputs associated with attenuverter controls, normalled to SUM/OR Bus.
Output from the analog OR circuit, selecting highest voltage.
Output from the analog SUM circuit, summing voltages.
To Next Page
