Need help?Do you have a question about the Make Noise Rene 2 and is the answer not in the manual?
Grid of knobs used to set CV values per location per channel.
Grid of buttons used to program channel behavior in Program Pages.
Used for global settings, including Z.ON, Z.RESET, and Select Bus behavior.
Procedure for calibrating each CV output to better drive a specific VCO.
General| Manufacturer | Make Noise |
|---|---|
| Model | Rene 2 |
| Width | 34 HP |
| Depth | 25 mm |
| Clock Input | Yes |
| Quantization | Yes |
| Voltage Range | +12V |
| CV Outputs | 3 |
| Gate Outputs | 4 |
| Features | Cartesian Sequencer |
| Inputs | Clock, X CV, Y CV, Z CV |
To Next Page
