Control with App
1、Download and install Makeblock HD app . by either way below
A. Download Makeblock appat http://app.makeblock.cc/ .
B. Scan QR code below to download Makeblock app.(Figure 1)
2 Check wiring, make sure everything is correct, and then turn on the power of your robot.
3、Turn on the Bluetooth of your smart device.
4、Run Makeblock app,select your robot from Examples.(Figure 2)
、
Figure 1 Figure 2
5 Put your smart device close to robot, touch the play button(Figure3)to find Bluetooth device,and then connect 、
6 Control your robot by the direction button(direction) and slider(speed).(Figure 5) 、
Figure 4
Figure 5Figure 3
24
23
the robot to your smart device.(Figure 4)
Now it’s time to play your robot!
To Next Page
Loading...
Need help?
General
