To Next PageTo Next Page
Need help?Do you have a question about the Makita 2106 and is the answer not in the manual?
Details maximum workpiece dimensions for round and rectangular cuts.
Lists required blade length, width, and thickness.
Specifies available blade speeds in FPM for high and low settings.
Provides the tool's physical dimensions and net weight.
Guidelines for maintaining a clean, well-lit, and hazard-free work environment.
Emphasizes proper attire, eye protection, and securing the workpiece.
Rules on using the correct tool, not forcing it, and safe servicing procedures.
Specifies correct blade dimensions and the use of Makita cutting wax.
Warnings regarding hot chips, avoiding gloves, and handling hot parts.
Instructions for operating the trigger switch, including lock-on function.
How to change the tool speed using the high/low selector switch.
Procedures for mounting, tensioning, and detaching the saw blade.
Steps for installing the stopper plate for precise square cutting alignment.
Using the stopper plate and a triangular rule for accurate 90-degree cuts.
Proper application of cutting wax and selecting the correct cutting position.
How to clean wax, chips, and dust from the tool after use.
Guidance on replacing tires and carbon brushes to maintain performance.
Guide to choosing the correct blade type and tooth pitch for various materials.
Lists essential tools like triangular rules, hex wrenches, and cutting wax.
General
