Need help?Do you have a question about the Makita 2704 and is the answer not in the manual?
General| Input power | - W |
|---|---|
| Blade bore | 15 mm |
| Blade diameter | 255 mm |
| Saw blade included | - |
| Idle speed (max) | 4800 RPM |
| Cutting depth (45º) | 63 mm |
| Cutting depth (90º) | 91 mm |
| Product color | Blue, Stainless steel |
| Placement supported | Tabletop |
Weight and Dimensions| Depth | 665 mm |
|---|---|
| Width | 753 mm |
| Height | 344 mm |
| Weight | 28000 g |
| Bore diameter | 15.88 mm |
Covers workspace, personal protection, tool handling, and maintenance safety guidelines.
Guidelines for workpiece handling, tool operation, and preventing common hazards.
Detailed instructions on how to avoid and prevent dangerous kickback situations.
Explains how to adjust the blade's cutting depth using the handle.
Instructions for setting the blade angle between 0° and 45°.
Step-by-step guide for safely installing and removing the saw blade.
Procedure to fit, adjust, and secure the rip fence for parallel cutting.
Steps to ensure the rip fence is parallel to the blade for safe and accurate cuts.
Detailed procedure for adjusting and securing the rip fence when it cannot be solidly fixed.
Detailed procedure for performing rip cuts safely and accurately.
Describes using push sticks and auxiliary fences for different rip cut widths.
Safety precautions and procedures for performing cross cuts.
Guidance on using the miter gauge for various cutting types.
To Next Page
