Need help?Do you have a question about the Makita 4350FCT/1 and is the answer not in the manual?
General| Brand | Makita |
|---|---|
| Model | 4350FCT/1 |
| Category | Power Tool |
| Language | English |
Maintain a clean, well-lit environment and avoid hazardous atmospheres.
Precautions for double-insulated tools and grounded surfaces.
Stay alert, dress properly, avoid accidental starting, and maintain balance.
Proper operation, maintenance, accessory use, and storage of the tool.
Guidance on selecting appropriate extension cords based on gauge and length.
How to select between orbital and straight line cutting actions for different materials.
Details on operating the trigger for starting, stopping, and continuous use.
How to adjust the tool's speed using the dial for optimal cutting.
Explanation of constant speed control for load stability and soft start for reduced shock.
Instructions for turning on and off the tool's illumination lamps.
Step-by-step guide for securely installing and removing the jig saw blade.
Convenient storage location for the hex wrench when not in use.
How to perform angled cuts by tilting the tool base up to 45 degrees.
Method for making cuts flush with a surface using the tool base position.
Techniques for creating internal cuts or shapes, including drilling starting holes.
Technique for starting cuts without a pilot hole by tilting the tool.
How to trim edges or make dimensional adjustments by lightly running the blade.
Recommendations for using coolants when cutting metal to prevent blade wear.
Attaching and using the optional dust nozzle for clean cutting operations.
Instructions for installing and using the rip fence for fast, clean, straight cuts.
Using the rip fence and circular guide pin to cut circles or arcs.
Fitting the cover plate to protect sensitive surfaces during cutting.
Attaching and using the device for splinter-free cuts, noting it cannot be used with bevel cuts.
Section for recording purchase details and serial number for service purposes.
To Next Page
