To Next PageTo Next Page
Need help?Do you have a question about the Makita 4351FCTJ and is the answer not in the manual?
General| Power | 720W |
|---|---|
| Stroke Length | 26mm |
| Strokes per Minute | 800 - 2800 spm |
| Cutting Capacity in Wood | 135mm |
| Cutting Capacity in Steel | 10mm |
| Weight | 2.5kg |
| Power Source | Corded |
| Cutting Capacity in Aluminium | 20mm |
| Voltage | 240V |
| Amperage | 3.1A |
| No Load Speed | 800 - 2800 spm |
| Length | 236mm |
| Features | Variable speed |
| Orbital Action | Yes, 4-stage |
Safety instructions for power tool operation, including electrical safety, workpiece security, and personal protective equipment.
Details how to change the cutting action by adjusting the lever to orbital or straight line modes.
Instructions on how to start and stop the tool using the switch lever.
Explains the speed adjustment dial for 4351CT/4351FCT models and provides a speed selection table.
Describes the electronic speed control for maintaining constant speed under load.
Highlights the safety benefit of a suppressed starting shock.
Details how to operate the lamps on the 4351FCT model by pulling the trigger.
Step-by-step guide for securely installing and removing the jig saw blade.
Information on the convenient storage location for the hex wrench.
Instructions for performing bevel cuts at angles between 0° and 45° using the base tilt.
Procedure for making front flush cuts by adjusting the tool base position.
Methods for creating internal cutouts, including boring a starting hole or plunge cutting.
Technique for trimming edges or making dimensional adjustments.
Guidance on using coolant for cutting metal to prevent blade wear.
How to attach and use the dust nozzle with a vacuum cleaner.
Instructions for installing and using the rip fence for straight cuts.
Guidance on using the rip fence for cutting circles or arcs of 170 mm or less in radius.
Instructions for installing and using the guide rail adapter set for straight and parallel cuts.
How to fit and use the cover plate to protect delicate surfaces during cutting.
Instructions for installing the anti-splintering device for splinter-free cuts.
