To Next PageTo Next Page
Need help?Do you have a question about the Makita 6211DH and is the answer not in the manual?
General| Chuck Capacity | 0.8 - 10 mm |
|---|---|
| No Load Speed | 0-2800 rpm |
| Max. Drilling Capacity in Steel | 10 mm |
| Max. Drilling Capacity in Wood | 21 mm |
| Weight | 1.7 kg |
| Chuck Size | 10 mm |
| Max Torque | 24 Nm |
| Voltage | 220V |
Essential safety rules covering work area, personal attire, tool handling, and maintenance.
Critical advice on matching tool voltage to power source to prevent injury and damage.
Key safety rules for using and maintaining Makita battery chargers and cartridges.
Specific precautions for battery charging temperatures, storage, and handling.
Safety advice for tool operation, footing, grip, and handling hot parts.
Step-by-step guide for inserting and removing the battery cartridge from the tool.
Instructions for charging the battery using the fast charger Model DC1201.
Procedure for fitting and removing drill bits or driver bits from the keyless chuck.
How to operate the trigger for speed control and the reversing switch.
Guidance on using the speed change lever for high and low speed settings.
How to set the clutch torque for different fastening applications using the adjusting ring.
Steps for starting, driving, and stopping screws with the driver drill.
Advice for drilling in wood and metal, including pilot holes and lubricants.
Explanation of the overload protector and how to resume operation after activation.
Instructions for installing the provided hook for temporary tool hanging.
Guidelines for ensuring product safety and reliability through authorized service.
Catalog of recommended bits, battery cartridges, chargers, and other accessories.
Instructions on how to properly recycle Makita batteries according to law.
Details of the warranty policy, coverage, exclusions, and legal rights.
