Need help?Do you have a question about the Makita 8390D and is the answer not in the manual?
General| Type | Cordless Drill Driver |
|---|---|
| Voltage | 18V |
| Battery Type | Li-ion |
| No Load Speed (Lo) | 0-400 RPM |
| Max. in steel | 13 mm |
| Max. in masonry | 13 mm |
| Battery Capacity | 3.0 Ah |
| Torque Settings | 16 |
Explains symbols used for the equipment and the tool's intended purpose.
Details noise and vibration levels for the 8270D model.
Details noise and vibration levels for the 8280D model.
Guidelines for safe work environments and electrical precautions.
Details noise and vibration levels for the 8390D model.
Rules for operator alertness, protective equipment, tool handling, and care.
Guidelines for using and maintaining battery packs and chargers.
Recommendations for tool servicing and using replacement parts.
Rules to avoid misuse and ensure personal safety with the tool.
Critical warnings and handling instructions for battery cartridges.
Advice for maximizing battery lifespan and performance.
Steps for inserting and removing the battery cartridge.
Operation of switch trigger, reversing switch, and speed change lever.
How to select drilling, hammering, or clutch modes using the ring.
Procedure for adjusting torque settings for screws.
Instructions for assembling and installing drill/driver bits.
How to perform hammer drilling operations safely and effectively.
Steps for using the tool for driving screws.
Techniques for drilling in wood, metal, and general advice.
Guidance on maintaining tool safety and reliability.
List of recommended accessories for the tool.
To Next Page
