Need help?Do you have a question about the Makita 9067L and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| No Load Speed | 8, 400 RPM |
| Voltage | 120V |
| Wheel Diameter | 7 inches |
| Weight | 11.2 lbs |
| Arbor | 5/8 inch |
| Spindle Thread | 5/8 inch - 11 UNC |
Safety precautions related to maintaining a clean and safe work environment.
Guidelines for safe use of electrical tools, focusing on double insulation and proper grounding.
Advice on personal protective measures and common sense for safe tool operation.
Best practices for using and maintaining tools to ensure safety and longevity.
Information regarding the proper servicing and repair of tools.
Describes the operation and cautions for the shaft lock mechanism used for accessory changes.
Explains how to operate the switch trigger and lock lever for tool control.
Details on securely installing the side grip for proper operation and control.
Instructions for fitting and removing the wheel guard for safety during operation.
Procedure for mounting and dismounting grinding wheels and multi-discs safely.
Guidance on installing and removing optional flex wheels with safety precautions.
Instructions for mounting and removing abrasive discs, including notes on usage.
Detailed guide on performing grinding and sanding operations correctly and safely.
Instructions for operating the tool with a wire cup brush, including safety checks.
Guidance on using wire wheel brushes safely and effectively.
Step-by-step instructions for replacing worn carbon brushes for motor maintenance.
Covers warranty coverage, exclusions, and limitations for the tool.
To Next Page
