To Next PageTo Next Page
Need help?Do you have a question about the Makita 9564PC and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Voltage | 120V |
| No Load Speed | 10, 000 RPM |
| Switch Type | Slide Switch |
| Wheel Diameter | 4-1/2 inches |
| Arbor | 5/8 inches |
| Spindle Thread | 5/8" - 11 UNC |
Explains the meaning of symbols used on the equipment for user understanding.
Describes the specific applications the tool is designed for, such as grinding, sanding, and cutting metal/stone.
Details the required voltage and type of electrical supply for operating the tool safely.
Covers fundamental safety precautions applicable to all power tools, including reading instructions and personal protection.
Provides specific safety advice for operating angle grinders, covering general and specific operations.
Explains the function of the shaft lock mechanism for accessory installation and removal.
Describes how to operate the tool's switch and lock-off lever to prevent accidental starting.
Instructions on securely attaching the auxiliary side handle for better tool control.
Guidance on fitting and removing the protective wheel guard for different types of wheels.
Specific steps for installing wheel guards using a locking screw mechanism.
Specific steps for installing wheel guards using a clamp lever mechanism.
Details on attaching an optional clip-on guard for cutting-off operations.
How to perform grinding and sanding tasks, including proper angle and technique.
Guide for using cut-off and diamond wheels, emphasizing safety and correct usage.
Instructions for operating the tool with a wire cup brush, including safety checks.
Guidance on using wire wheel brushes, highlighting pressure and safety precautions.
Importance and method of cleaning the tool's air vents to ensure proper operation and longevity.
