Need help?Do you have a question about the Makita 9565CV and is the answer not in the manual?
Indicates the need to read the instruction manual for proper understanding and use of the equipment.
Symbol indicating double insulation for enhanced electrical safety, allowing use without earth connection.
Mandates the use of safety glasses to protect eyes from potential hazards during operation.
Advises wearing ear protection to prevent hearing damage from noise exposure.
Specifies that the tool is designed for grinding, sanding, and cutting metal and stone without water.
Details power supply requirements, including voltage matching and suitability for single-phase AC supply.
Provides typical A-weighted noise levels for specific models as determined by EN60745 standards.
Lists vibration total values determined according to EN60745 standards for various models and work modes.
States that Makita Corporation declares conformity with European directives for specified angle grinder models.
Guidelines for maintaining a safe work environment, including lighting, cleanliness, and avoiding explosive atmospheres.
Precautions related to electrical safety, including plug compatibility, grounding, cord care, and RCD usage.
Instructions on maintaining personal safety, alertness, PPE use, and preventing unintentional starting.
Guidelines for tool maintenance, emphasizing qualified personnel and using identical replacement parts.
General safety precautions applicable to various grinding and sanding operations.
Crucial safety information and precautions to prevent kickback during tool operation.
Specific safety advice for grinding and abrasive cutting-off tasks, including guard and wheel usage.
Further safety warnings focused on abrasive cutting-off, covering wheel jamming, body positioning, and cut interruption.
Safety advice tailored for sanding operations, particularly regarding sanding disc selection and hazards.
Safety guidelines for wire brushing operations, including bristle hazards and guard usage.
Further safety advice covering wheel types, spindle care, and accessory mounting.
Description of the shaft lock mechanism used for accessory installation/removal and preventing spindle rotation.
Explanation of how to operate the slide switch for starting, stopping, and continuous operation of the tool.
Instructions specific to tools equipped with a lock-on switch feature for continuous operation.
Instructions for tools that do not have a lock-on switch, requiring continuous switch activation.
Details on the speed adjusting dial for specific models, including speed settings from 1 to 5.
Explanation of the electronic constant speed control feature for maintaining consistent speed under load.
Description of the soft start feature, which suppresses starting shock for smoother operation.
Information about the overload protector that automatically stops the tool to prevent motor damage.
Instructions on how to securely install the side grip (handle) onto the tool.
Procedure for installing or removing the wheel guard on tools with a locking screw type guard.
Procedure for installing or removing the wheel guard on tools with a clamp lever type guard.
Steps for installing or removing depressed center grinding wheels or multi-discs.
Instructions for installing or removing optional dust cover attachments.
Guidance on performing grinding and sanding operations, including grip, angle, and break-in procedures.
Instructions for operating the tool with abrasive cut-off or diamond wheels, including mounting and direction.
Procedures and precautions for maintaining the tool, including cleaning air vents and professional servicing.
List and description of recommended optional accessories for use with the Makita tool.
To Next Page
General
