To Next PageTo Next Page
Need help?Do you have a question about the Makita 9565PCV and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| No Load Speed | 2, 800 - 10, 500 RPM |
| Variable Speed Control | Yes |
| Electronic Speed Control | Yes |
| Voltage | 120 V |
| Motor Power | 1400W |
| Rated Input Power | 1400W |
| Wheel Diameter | 5 in |
| Arbor / Spindle Thread | 5/8" - 11 UNC |
| Frequency | 60 Hz |
Identifies various parts of the angle grinder based on diagrams.
Lists key technical data like dimensions, speeds, and weights.
Details the tool's purpose and power supply requirements.
Universal safety advice for power tool operation.
Safety rules tailored for angle grinder operations.
Guidelines on required safety gear for the operator.
Precautions for power cord management and accessory use.
Detailed instructions on how to avoid and manage kickback.
Specific safety advice for cut-off wheel usage.
Safety precautions for sanding and wire brushing.
Further safety recommendations and specific warnings.
How to use the shaft lock and operate the switch lever.
Using the speed dial and understanding electronic features.
Instructions for installing the side grip handle.
Procedures for fitting and adjusting wheel guards for various wheel types.
Steps for mounting grinding wheels, discs, and wire brushes onto the spindle.
Guidance on performing grinding and sanding tasks, including grip and angle.
Safety and operational tips for using wire cup and bevel brushes.
Specific safety and operational instructions for cut-off and diamond wheels.
Guidelines for cleaning, inspection, and repair of the tool.
