Need help?Do you have a question about the Makita 9565H and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Voltage | 120V |
| Weight | 4.4 lbs |
| Power Input | 1, 300W |
| Wheel Diameter | 5 inches |
| Spindle Thread | 5/8" - 11 UNC |
The tool is for grinding, sanding, and cutting metal/stone without water.
Connect to matching voltage, single-phase AC, double-insulated for use without earth wire.
Fit guard with protrusion aligned to bearing box notch, then rotate and tighten screw.
Mount guard, align protrusion to notch, rotate, and fasten with lever-operated screw.
Mount inner flange, fit wheel, screw lock nut, and tighten using shaft lock.
To Next Page
