To Next PageTo Next Page
Need help?Do you have a question about the Makita 9558HNR and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Motor Power | 840 W |
| Disc Diameter | 125 mm |
| No Load Speed | 11000 rpm |
| Weight | 1.8 kg |
| Spindle Thread | M14 |
| Net Weight | 1.8 kg |
| Cable Length | 2.5 m |
Explains symbols used for the equipment, ensuring user understanding before operation.
Describes the tool's purpose for grinding, sanding, wire brushing, and cutting metal/stone.
Details connection requirements and double insulation for safe operation with single-phase AC supply.
Presents typical vibration total values for surface grinding and disc sanding modes.
Crucial safety instructions and precautions for operating power tools to prevent injury.
General safety precautions for grinding, sanding, wire brushing, and cutting-off operations.
Explains kickback and provides precautions to avoid it during operation.
Details specific safety for grinding and cutting-off, including wheel selection and guard usage.
Provides safety guidelines for sanding operations, focusing on disc paper selection and handling.
Safety advice for wire brushing, emphasizing guard use and avoiding overstressing wires.
Covers specific safety points like using fiberglass-reinforced wheels and avoiding stone cup wheels.
Describes the function and safe operation of the shaft lock mechanism for accessory changes.
Explains how to operate the slide switch for starting, stopping, and continuous use.
Details the safety feature preventing accidental starts when power is restored.
Highlights the soft start feature that reduces starting reaction for smoother operation.
Instructions for securely attaching the side grip handle to the tool.
Guidance on fitting and removing wheel guards for various wheel types.
Steps for mounting and removing depressed center wheels or flap discs safely.
Procedure for installing and removing flex wheels, including safety precautions.
Steps for fitting and removing abrasive discs, including specific models.
Guidance on installing cut-off and diamond wheels with specific guards and types.
Instructions for attaching and securing a wire cup brush to the spindle.
Procedure for installing and tightening a wire wheel brush onto the spindle.
Steps for mounting a hole cutter onto the spindle and tightening it securely.
Information on using optional dust collecting guards for cutting-off operations.
Describes the technique for grinding and sanding, including angle and break-in period.
How to safely use cut-off and diamond wheels, emphasizing proper technique and avoiding side pressure.
Guidance on using wire cup brushes, focusing on no-load checks and avoiding excessive pressure.
Instructions for using wire wheel brushes, including no-load checks and avoiding over-bending wires.
How to operate the hole cutter, emphasizing no-load checks and avoiding tilting.
Instructions on keeping the tool's air vents clean for optimal performance and to prevent hazards.
Lists recommended accessories, stressing correct usage and potential injury risks from alternatives.
