Need help?Do you have a question about the Makita 9554HN and is the answer not in the manual?
General| Power Input | 840 W |
|---|---|
| No Load Speed | 11000 RPM |
| Wheel Diameter | 115 mm |
| Weight | 1.8 kg |
| Voltage | 230 V |
| Power | 840 W |
| Spindle thread | M14 |
| Net weight | 1.8 kg |
| Cable length | 2.5 m |
Explains symbols used for the equipment and their meanings before use.
Describes the tool's intended purpose for grinding, sanding, and cutting metal and stone materials.
Details power connection requirements and double insulation features for safe operation.
Provides typical A-weighted noise levels according to EN60745 standards.
Details vibration total values for surface grinding according to EN60745.
Safety recommendation to wear ear protection during operation.
Guidelines for maintaining a safe and well-lit work environment and keeping bystanders away.
Precautions regarding plugs, grounding, rain, wet conditions, and cord handling.
Emphasizes staying alert, not using the tool when tired or under influence.
Recommends wearing eye protection, dust masks, safety shoes, and hearing protection.
Ensures the switch is off before connecting power or picking up the tool.
Removes any tool before turning the power tool on to prevent injury.
Use the correct power tool for the application and avoid forcing it.
Do not use if the switch does not turn on and off; it must be repaired.
Disconnect from power source before making adjustments or changing accessories.
Store idle tools out of reach of children and unfamiliar users.
General safety rules for grinding, sanding, wire brushing, and abrasive cutting-off operations.
Provides precautions to avoid kickback, including grip and body positioning.
Specific safety advice for using sanding discs and paper, including size recommendations.
Specific safety advice for wire brushing operations, including bristle hazards and guard use.
Specific safety precautions for abrasive cut-off, including jamming, pressure, and depth of cut.
Rules for using wheels, guards, and flanges correctly for grinding and cut-off.
Specific warnings regarding fiberglass-reinforced wheels and stone cup type wheels.
Describes the function and operation of the shaft lock for accessory changes.
Explains how to operate the slide switch for starting, stopping, and continuous operation.
Instructions for securely installing the side grip or handle onto the tool.
Procedure for installing and removing the wheel guard for different wheel types.
Steps for mounting and removing depressed center grinding wheels or multi-discs.
Guidance on using abrasive cut-off or diamond wheels, including mounting and angle.
Instructions for performing grinding and sanding operations with proper grip and angle.
General precautions for maintenance, including cleaning air vents and using authorized service centers.
Lists accessories recommended for use with the Makita tool and their purposes.
To Next Page
