To Next PageTo Next Page
Need help?Do you have a question about the Makita 9558NBRZ and is the answer not in the manual?
General| Power Input | 840 W |
|---|---|
| No Load Speed | 11, 000 rpm |
| Disc/Wheel Diameter | 125 mm |
| Weight | 1.8 kg |
| Spindle Thread | M14 |
| Cable Length | 2.5 m |
Details vibration emission values for different models and work modes.
States A-weighted noise levels and required ear protection.
Describes how to use the shaft lock for accessory installation/removal.
Explains how to operate the slide switch and locking function.
Details the safety feature preventing accidental starting.
Mentions the feature that reduces starting reaction.
Instructions for securely attaching the side grip.
Procedure for mounting and removing the wheel guard.
Steps for fitting and removing specific types of discs.
Details about the optional Super flange for M14 spindle threads.
Guidance on installing and removing flex wheels with guards.
Steps for mounting and removing abrasive discs with rubber pads.
How to perform grinding and sanding with the tool at an angle.
Guidelines for using cut-off and diamond wheels safely.
Instructions for installing and using wire cup brushes.
Guidance on installing and using wire wheel brushes.
Instructions for cleaning air vents to maintain tool performance.
