Need help?Do you have a question about the Makita AN942 and is the answer not in the manual?
General| Operating Air Pressure | 70 - 120 psi |
|---|---|
| Magazine Capacity | 75 nails |
| Weight | 8.3 lbs |
| Power Source | Pneumatic |
| Type | Framing Nailer |
| Nail Size | 2-1/2" - 3-1/2" |
| Fastener Type | Round head nails |
Basic rules for safe tool operation, including fastener assumptions, trigger control, and avoiding misuse.
Guidance on selecting a compressor with adequate pressure and air output for efficient and cost-effective operation.
Recommendations for air hose size and length to ensure continuous and efficient nailing performance.
Instructions on installing an air set and setting the oiler for optimal tool performance and longevity.
How to use, install, and store the nose adapter for protecting workpieces with easily-marred surfaces.
Procedure for adjusting the nail depth using the adjuster and modifying air pressure as needed.
Steps for safely loading nail strips into the magazine of the pneumatic nailer.
Procedure for safely unloading nail strips from the magazine.
Steps to securely connect the air hose to the tool, ensuring proper locking and safety coupling.
Explanation of intermittent vs. continuous nailing modes and related safety precautions.
Guidelines for handling and storing nail strips to prevent damage and ensure proper feeding.
Procedures for checking the tool's condition, screws, contact element, and trigger for proper function.
To Next Page
