To Next Page
C
Caroline MartinezJul 26, 2025
Why is my Makita Power Tool weak?
- JJennifer WalkerJul 26, 2025
If your Makita Power Tool is not driving correctly, ensure that the air supply is adequate. If the issue persists, consider installing a new piston set.
Why is my Makita Power Tool weak?
If your Makita Power Tool is not driving correctly, ensure that the air supply is adequate. If the issue persists, consider installing a new piston set.
What to do if my Makita Power Tool is jamming?
If your Makita Power Tool is jamming, try cleaning the tool. Also, lubricating the magazine may help. If the problem continues, consider installing a new spring.
How to fix poor feed on Makita Power Tool?
If your Makita Power Tool is not feeding correctly, you can try cleaning the tool. You might also need to lubricate the magazine. If these steps don't resolve the issue, consider installing a new spring.
What to do if my Makita Power Tool does nothing?
If your Makita Power Tool isn't working, check the air supply. Alternatively, consider installing a new head valve piston set.
How to fix air leak near top of Makita Power Tool?
If you notice an air leak near the top of your Makita Power Tool, try tightening the screws. If the leak persists, consider installing a head valve piston set.
How to repair air leak near bottom of Makita Power Tool?
If your Makita Power Tool has an air leak near the bottom, try tightening the screws. If that doesn't solve the problem, consider installing a new bumper or piston set.
Emphasizes wearing safety glasses, hearing protection, and appropriate clothing for user safety.
Guidelines for safe operation, avoiding hazards like sparks, misuse, and improper environments.
Procedures for safe cleaning, inspection, and authorized repair of the tool.
Guidance on choosing an air compressor with adequate pressure and output for efficient operation.
Advice on using appropriate air hoses for continuous, efficient stapling operations.
Instructions for installing and adjusting air set components for optimal performance.
Steps for safely opening, loading staples, and closing the magazine.
Proper procedure for connecting the air hose to the tool and safety considerations.
Instructions for intermittent and continuous stapling operations.
Procedures for clearing jams, using the hook, and proper storage of staples.
General checks and lubrication for maintaining the stapler's condition.
Procedures for draining water, checking oil levels, and maintaining air supply components.
Guidelines for protecting the air hose from heat, chemicals, and damage.
General| Brand | Makita |
|---|---|
| Model | AT638 |
| Category | Staple Gun |
| Language | English |
