To Next Page
C
Caroline MartinezJul 26, 2025
Why is my Makita Power Tool weak?
- JJennifer WalkerJul 26, 2025
If your Makita Power Tool is not driving correctly, ensure that the air supply is adequate. If the issue persists, consider installing a new piston set.
Why is my Makita Power Tool weak?
If your Makita Power Tool is not driving correctly, ensure that the air supply is adequate. If the issue persists, consider installing a new piston set.
What to do if my Makita Power Tool is jamming?
If your Makita Power Tool is jamming, try cleaning the tool. Also, lubricating the magazine may help. If the problem continues, consider installing a new spring.
How to fix poor feed on Makita Power Tool?
If your Makita Power Tool is not feeding correctly, you can try cleaning the tool. You might also need to lubricate the magazine. If these steps don't resolve the issue, consider installing a new spring.
What to do if my Makita Power Tool does nothing?
If your Makita Power Tool isn't working, check the air supply. Alternatively, consider installing a new head valve piston set.
How to fix air leak near top of Makita Power Tool?
If you notice an air leak near the top of your Makita Power Tool, try tightening the screws. If the leak persists, consider installing a head valve piston set.
General| Brand | Makita |
|---|---|
| Model | AT638 |
| Category | Staple Gun |
| Language | English |
