To Next PageTo Next Page
Need help?Do you have a question about the Makita BHP458 and is the answer not in the manual?
General| Torque settings | 21 |
|---|---|
| Idle speed (1st gear) | 400 RPM |
| Idle speed (2nd gear) | 2000 RPM |
| Drilling diameter in wood (max) | 76 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 16 mm |
| Drilling | Yes |
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 225 mm |
|---|---|
| Width | 79 mm |
| Height | 259 mm |
| Weight | 2300 g |
Specific safety instructions for hammer driver drills.
Guidance on maximizing the lifespan of the battery.
Procedures for inserting and removing the battery.
How the tool protects the battery from overload or low voltage.
How to operate the main switch trigger for the tool.
How to attach and use the auxiliary side handle.
How to activate and use the tool's integrated lamp.
Procedure for changing the drill's rotation direction.
How to adjust the tool's operating speed settings.
How to choose between drilling, hammer drilling, or screwdriving modes.
How to set the torque limit for screwdriving operations.
How to check the current battery charge level.
Instructions for replacing worn carbon brushes.
