To Next PageTo Next Page
Need help?Do you have a question about the Makita BHP454 and is the answer not in the manual?
Lists numbered components of the tool and their names.
Key technical data including capacities, speed, voltage, and weight.
Defines the proper applications for the hammer driver drill.
Critical safety precautions for handling battery cartridges.
Recommendations for charging and storage to extend battery lifespan.
Step-by-step guide for inserting and removing the battery.
Explanation of the automatic power cut-off for battery protection.
How to use the trigger switch and speed change lever.
Instructions for using the tool's front lamp.
How to change the tool's rotation direction.
Guidance on selecting between high and low speed settings.
How to choose drilling, hammering, or clutch modes.
How to set the torque for screwdriving applications.
Attaching the side grip for enhanced control and safety.
Instructions for securing drill bits in the chuck.
How to attach the bit holder for convenient bit storage.
Setting up the depth rod for consistent drilling depth.
Attaching the hook for temporary tool hanging.
Safe and effective methods for hammer drilling.
Using the optional blow-out bulb to clear debris from holes.
Step-by-step process for screwdriving tasks.
General drilling procedures and tips.
Specific techniques for drilling wood materials.
Techniques for drilling metal, including lubrication.
Guide for replacing worn carbon brushes.
List of recommended accessories for the tool.
A-weighted noise levels for models BHP444 and BHP454.
Total vibration values for different work modes.
Official declaration of compliance with European directives.
General
