Why does my Makita Blower motor stop running after a little use?
If your Makita Blower's motor stops running shortly after you start using it, it's likely due to overheating. To resolve this, stop using the tool and allow it to cool down.
What to do if the motor of my Makita DAS180Z Blower cannot stop?
If the motor of your Makita Blower continues to run even after you've switched it off, it indicates an electrical or electronic malfunction. Immediately remove the battery and seek assistance from your local authorized service center for repair.
What to do if my Makita DAS180Z has abnormal vibration?
If you experience abnormal vibration with your Makita Blower, stop using it immediately. This indicates an issue with the drive system, and you should seek repair from your local authorized service center.
Provides essential safety guidelines for operating power tools to prevent injury.
Covers general operating procedures, including stopping the tool and keeping clear of hazards.
Guides users on safely attaching and detaching the battery pack from the tool.
Explains how to check the battery level using indicator lamps on the cartridge.
Describes the tool's automatic shut-off features like overload and overheat protection.
Details the operation of the switch trigger, lock button, and trigger-lock button.
Explains how to change the air volume settings across four different modes.
Lists common problems, their probable causes, and recommended remedies for the tool.
To Next Page
General
