To Next PageTo Next PageWhy doesn't my Makita Trimmer motor run?
The motor might not be running because the battery cartridge isn't installed correctly. Ensure the battery cartridge is properly installed. Alternatively, the battery may be experiencing undervoltage. Try recharging the battery; if it remains ineffective, consider replacing it.
What to do if my Makita Trimmer motor stops running after a little use?
If your Makita Trimmer's motor stops after a short period, it could be due to a low battery charge. Recharge the battery, and if that doesn't solve the problem, think about replacing it. Overheating can also cause this issue. If overheating is the cause, stop using the trimmer and allow it to cool down.
What to do if the cutting tool does not rotate on my Makita Trimmer?
If the cutting tool on your Makita Trimmer isn't rotating, it could be because a foreign object, like a branch, is stuck between the guard and the cutting tool. Remove any foreign objects that may be causing the blockage.
What to do if the cutting tool and motor cannot stop on my Makita Trimmer?
If the cutting tool and motor on your Makita Trimmer won't stop, it could be due to an electric or electronic malfunction. Remove the battery immediately.
Why doesn't my Makita Trimmer reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, the battery might be installed improperly. Make sure the battery cartridge is installed correctly as described in the manual. Also, the battery power might be dropping. Try recharging the battery. If recharging doesn't help, replace the battery.
How to fix abnormal vibration in my Makita Trimmer?
Abnormal vibration in your Makita Trimmer could be due to one end of the nylon cord being broken. To resolve this, tap the nylon cutting head against the ground while it is rotating to feed the cord.
General| Input voltage | 220-240 V |
|---|---|
| Output current | 9 A |
| Input frequency | 50/60 Hz |
| Battery recharge time | 0.36 h |
| Battery voltage | 18 V |
| Battery capacity | 3000 mAh |
| Product type | Battery charger |
| Product color | Black |
| Brand compatibility | Makita |
| Compatible battery sizes | - |
| Number of batteries supported | 1 |
Weight and Dimensions| Depth | 156 mm |
|---|---|
| Width | 190 mm |
| Height | 84 mm |
| Weight | 750 g |
| Cable length | 2 m |
