Why doesn't my Makita Trimmer motor run?
The motor might not be running because the battery cartridge isn't installed correctly. Ensure the battery cartridge is properly installed. Alternatively, the battery may be experiencing undervoltage. Try recharging the battery; if it remains ineffective, consider replacing it.
What to do if my Makita Trimmer motor stops running after a little use?
If your Makita Trimmer's motor stops after a short period, it could be due to a low battery charge. Recharge the battery, and if that doesn't solve the problem, think about replacing it. Overheating can also cause this issue. If overheating is the cause, stop using the trimmer and allow it to cool down.
What to do if the cutting tool does not rotate on my Makita Trimmer?
If the cutting tool on your Makita Trimmer isn't rotating, it could be because a foreign object, like a branch, is stuck between the guard and the cutting tool. Remove any foreign objects that may be causing the blockage.
What to do if the cutting tool and motor cannot stop on my Makita Trimmer?
If the cutting tool and motor on your Makita Trimmer won't stop, it could be due to an electric or electronic malfunction. Remove the battery immediately.
Why doesn't my Makita Trimmer reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, the battery might be installed improperly. Make sure the battery cartridge is installed correctly as described in the manual. Also, the battery power might be dropping. Try recharging the battery. If recharging doesn't help, replace the battery.
How to fix abnormal vibration in my Makita Trimmer?
Abnormal vibration in your Makita Trimmer could be due to one end of the nylon cord being broken. To resolve this, tap the nylon cutting head against the ground while it is rotating to feed the cord.
General| Input voltage | 220-240 V |
|---|---|
| Output current | 9 A |
| Input frequency | 50/60 Hz |
| Battery recharge time | 0.36 h |
| Battery voltage | 18 V |
| Battery capacity | 3000 mAh |
| Product type | Battery charger |
| Product color | Black |
| Brand compatibility | Makita |
| Compatible battery sizes | - |
| Number of batteries supported | 1 |
Weight and Dimensions| Depth | 156 mm |
|---|---|
| Width | 190 mm |
| Height | 84 mm |
| Weight | 750 g |
| Cable length | 2 m |
Lists compatible battery cartridges and chargers for the tool.
Identifies the recommended battery adapter accessory.
Explains the meaning of various safety and operational symbols used in the manual.
Provides essential safety precautions applicable to all power tools.
Outlines safety measures related to the operating environment.
Details safety precautions concerning electrical hazards.
Advises on personal protective measures and safe operating practices.
Instructions for safe and effective use and maintenance of battery-powered tools.
Guidance on professional servicing and repair of the power tool.
Specifies the designed purpose and limitations of the tool.
Provides general advice and rules for operating the tool safely.
Safety rules concerning electrical components and battery handling.
Steps and precautions for starting and preparing the tool for use.
General guidelines for safe and effective tool operation.
Explains kickback phenomenon and how to avoid it.
Instructions for safely moving the tool from one place to another.
Guidelines for routine upkeep and care of the tool.
Recommendations for storing the tool when not in use.
Procedures to follow in case of injury or medical emergency.
Crucial safety warnings specific to the battery cartridge.
Step-by-step guide for inserting and removing the battery.
Explains the tool's safety features that prevent damage or injury.
Describes how the tool protects itself from overload conditions.
Details the tool's protection against overheating.
Explains the protection against battery over-discharge.
How to check the current charge level of the battery.
Instructions on operating the main power button.
Describes how the switch trigger operates and safety precautions.
How to select and adjust the tool's operating speed.
How to use the reverse function to clear debris.
Information about the tool's electric braking system.
Steps for attaching and securing the tool's handle.
Guide for connecting the attachment pipe to the power unit.
Instructions for fitting the protective barrier to the tool.
Steps for fitting the tool's protective guard.
Guide for attaching various cutting accessories.
Instructions for installing and removing the plastic cutting blade.
Instructions for installing and removing the nylon cutting head.
How to adjust handle and hanger for comfortable use.
Steps for securing and adjusting the shoulder harness.
How to quickly detach the tool from the shoulder harness.
Guidance on proper posture and safe handling techniques.
Specific operational advice for the nylon cutting head.
Instructions for replacing the nylon cutting line.
Guide for replacing a worn or broken plastic blade.
To Next Page
