Makita DC18RC - Specifications; Applicable battery cartridge and charger; Recommended battery adapter; Symbols

2 ENGLISH
SPECIFICATIONS
Model: DUR190U DUR190L DUR191U DUR191L
Type of handle Bike handle Loop handle Bike handle Loop handle
No load speed 3: 6,000 min
-1
2: 5,100 min
-1
1: 3,500 min
-1
Overall length
(without cutting tool)
1,775 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
3-tooth blade
(P/N 191J34-5)
230 mm
4-tooth blade
(P/N 729025-2)
230 mm
Nylon cutting head
(P/N 126674-0)
300 mm
Plastic blade
(P/N 126642-3)
230 mm
Rated voltage D.C. 18 V
Net weight 3.1 - 3.4 kg 2.9 - 3.2 kg 3.4 - 3.7 kg 3.2 - 3.5 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydi󰀨erfromcountrytocountry.
• Theweightmaydi󰀨erdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended battery adapter
Battery adapter PDC01
• The battery adapter(s) listed above may not be available depending on your region of residence.
• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
15m(50FT)
Keep distance at least 15 m.
Danger;beawareofthrownobjects.
Caution; kickback
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Do not expose to moisture.