EasyManua.ls Logo

Makita DCS3500 - User Manual

Makita DCS3500
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Important:
Read this instruction manual carefully before putting the chain saw into operation and strictly observe the
safety regulations!
Keep this instruction manual!
Instruction Manual
DCS3500
DCS3501
DCS4300
DCS4301

Table of Contents

Other manuals for Makita DCS3500

Preview: Repair Manual
Repair Manual32 pages

Questions and Answers

  • M
    Matthew CohenJul 31, 2025
    What to do if my Makita Chainsaw engine does not start?
    • A
      Alex DavisJul 31, 2025
      If your Makita Chainsaw engine doesn't start easily, there could be a malfunction in the fuel supply, compression system, or a mechanical issue. Inspect the ignition spark, fuel tank, stop switch position, wiring for faults or short-circuits, spark plug cap, combination switch, carburetor, suction head, fuel line, cylinder base packing ring, radial shaft packings, cylinder or piston rings, and starter.
  • D
    Daniel PaceAug 5, 2025
    Why is there no chain lubrication on my Makita Chainsaw?
    • J
      Jesse HernandezAug 5, 2025
      If there is no chain lubrication in your Makita Chainsaw, the oil tank could be empty, the oil guide groove could be dirty, or the oil-pump adjusting screw might be incorrectly adjusted. Refill the oil tank, clean the oil guide groove, and adjust the oil-pump adjusting screw.
  • J
    Jennifer BarberAug 10, 2025
    How to fix warm start difficulties on my Makita DCS3500 Chainsaw?
    • D
      Daniel KramerAug 10, 2025
      If you're having trouble starting your warm Makita Chainsaw, the carburetor adjustment might be off. Adjust the carburetor.
  • E
    Emma GentryAug 15, 2025
    What to do if the chain does not run on my Makita Chainsaw?
    • H
      Harold GreeneAug 15, 2025
      If the chain of your Makita Chainsaw does not run, the chain brake may be actuated. Release the chain brake.
  • C
    Christopher WallaceAug 20, 2025
    Why does my Makita DCS3500 have insufficient power?
    • R
      Rebecca KaufmanAug 20, 2025
      If your Makita Chainsaw has insufficient power, the air filter might be dirty, the carburetor adjustment might be wrong, the muffler or exhaust channel in the cylinder might be clogged, or the spark arrester screen might be clogged. To resolve this, clean or replace the air filter, adjust the carburetor, and unclog the muffler and exhaust channel.
  • D
    Danielle BergAug 26, 2025
    What to do if my Makita DCS3500 engine starts, but dies immediately?
    • D
      Dana ClarkAug 26, 2025
      If your Makita Chainsaw starts but dies immediately, the idling adjustment might be wrong, or the suction head or carburetor might be dirty. Try cleaning the suction head and carburetor, and check the tank venting and fuel line.

Summary

Safety Precautions

General Precautions

User responsibilities, safe operation practices, and warnings for chain saw use.

Protective Equipment

Required safety gear for head, eyes, hands, feet, and hearing during operation.

Fuels; Refuelling

Guidelines for safe handling, storage, and mixing of fuel and oil for the engine.

Kickback and Working Behavior

Preventing kickback and safe operating techniques for various cutting tasks.

Transport and Storage

Safe procedures for carrying, transporting, and storing the chain saw.

Technical Information

Technical Data

Specifications, performance, and measurements of the chain saw models.

Denomination of Components

Identification and numbering of all parts of the chain saw.

Putting into Operation

Mounting Guide Bar and Saw Chain

Step-by-step instructions for attaching the guide bar and saw chain.

Chain Tensioning and Checking

Procedures for adjusting and verifying the correct chain tension.

Starting and Stopping the Engine

Detailed steps for cold and warm starting, and safely stopping the engine.

Adjusting the Carburetor

Instructions for adjusting the carburetor for optimal engine performance.

Maintenance and Troubleshooting

Sharpening the Saw Chain

Guide to proper chain sharpening techniques and angles.

Cleaning the Air Filter

Procedures for cleaning or replacing the air filter for engine performance.

Replacing the Spark Plug

Steps for removing, checking, and replacing the spark plug.

Instructions for Periodic Maintenance

Schedule and guidelines for regular maintenance tasks.

Trouble Shooting

Common malfunctions, their causes, and solutions for the chain saw.

Makita DCS3500 Specifications

General IconGeneral
Power SourcePetrol
Engine Displacement35.2 cc
Fuel Tank Capacity0.48 L
Weight4.4 kg
Bar Length35 cm
Chain Pitch3/8"
Chain Gauge0.050"
TypePetrol Chainsaw

Related product manuals