Makita DCS3500 Repair Manual

32 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

___

Reparaturanleitung PS-4600 / PS-5000 1

Repair manual DCS3500 / DCS3501 / DCS4300 / DCS4301 / EA3500F / EA3501F / EA4300F / EA4301F / MEA3500L / MEA3500M / MEA4300G / MEA4300L

www.dolmar.de

Repair Manual

Caution:

Before doing any maintenance or service work, the combination switch must be engaged in the service position, in

order to prevent unintended starting by the easy start system!

DCS3500

DCS3501

DCS4300

DCS4301

EA3500F

EA3501F

EA4300F

EA4301F

MEA3500L

MEA3500M

MEA4300G

MEA4300L

Table of Contents

Other manuals for Makita DCS3500

Instruction Manual40 pages

Questions and Answers:

M
Matthew CohenJul 31, 2025
What to do if my Makita Chainsaw engine does not start?
- A
  Alex DavisJul 31, 2025
  If your Makita Chainsaw engine doesn't start easily, there could be a malfunction in the fuel supply, compression system, or a mechanical issue. Inspect the ignition spark, fuel tank, stop switch position, wiring for faults or short-circuits, spark plug cap, combination switch, carburetor, suction head, fuel line, cylinder base packing ring, radial shaft packings, cylinder or piston rings, and starter.
D
Daniel PaceAug 5, 2025
Why is there no chain lubrication on my Makita Chainsaw?
- J
  Jesse HernandezAug 5, 2025
  If there is no chain lubrication in your Makita Chainsaw, the oil tank could be empty, the oil guide groove could be dirty, or the oil-pump adjusting screw might be incorrectly adjusted. Refill the oil tank, clean the oil guide groove, and adjust the oil-pump adjusting screw.
J
Jennifer BarberAug 10, 2025
How to fix warm start difficulties on my Makita DCS3500 Chainsaw?
- D
  Daniel KramerAug 10, 2025
  If you're having trouble starting your warm Makita Chainsaw, the carburetor adjustment might be off. Adjust the carburetor.
E
Emma GentryAug 15, 2025
What to do if the chain does not run on my Makita Chainsaw?
- H
  Harold GreeneAug 15, 2025
  If the chain of your Makita Chainsaw does not run, the chain brake may be actuated. Release the chain brake.
C
Christopher WallaceAug 20, 2025
Why does my Makita DCS3500 have insufficient power?
- R
  Rebecca KaufmanAug 20, 2025
  If your Makita Chainsaw has insufficient power, the air filter might be dirty, the carburetor adjustment might be wrong, the muffler or exhaust channel in the cylinder might be clogged, or the spark arrester screen might be clogged. To resolve this, clean or replace the air filter, adjust the carburetor, and unclog the muffler and exhaust channel.
D
Danielle BergAug 26, 2025
What to do if my Makita DCS3500 engine starts, but dies immediately?
- D
  Dana ClarkAug 26, 2025
  If your Makita Chainsaw starts but dies immediately, the idling adjustment might be wrong, or the suction head or carburetor might be dirty. Try cleaning the suction head and carburetor, and check the tank venting and fuel line.

Makita DCS3500 Specifications

General

Power Source	Petrol
Engine Displacement	35.2 cc
Fuel Tank Capacity	0.48 L
Weight	4.4 kg
Bar Length	35 cm
Chain Pitch	3/8"
Chain Gauge	0.050"
Type	Petrol Chainsaw

Related product manuals

Preview: Makita DCS3501

Preview: Makita DCS34

Preview: Makita DCS3410TH

Makita DCS3410TH

Preview: Makita DCS 34

Preview: Makita DCS410

Preview: Makita DCS9010

Preview: Makita DCS232T