To Next PageTo Next Page
Need help?Do you have a question about the Makita DDA350 and is the answer not in the manual?
General| Vibration emission | 2.5 m/s² |
|---|---|
| Product color | Black, Blue |
| Power source | Battery |
| Charging time | 36 min |
| Battery voltage | 18 V |
| Battery capacity | 4 Ah |
| Idle speed (1st gear) | 1800 RPM |
| Drilling diameter in wood (max) | 25 mm |
| Drilling diameter in steel (max) | 10 mm |
| Built-in light | Yes |
| Product design | Right-angle drill |
Weight and Dimensions| Depth | 314 mm |
|---|---|
| Width | 79 mm |
| Height | 115 mm |
| Weight | 1800 g |
Tool is intended for drilling in wood, metal, and plastic materials.
Details A-weighted noise levels determined according to EN60745.
Specifies vibration total value determined according to EN60745 standards.
Manufacturer's declaration of compliance with European Directives.
Guidance on maximizing battery lifespan and performance.
Step-by-step instructions for battery installation and removal.
Explanation of the tool's automatic power cut-off system.
Details on how to operate the switch trigger for starting and stopping.
Instructions on how to activate and use the integrated work light.
Guidance on changing the direction of rotation using the reversing switch.
Procedures for attaching external components and accessories.
General procedures and precautions for drilling operations.
Specific techniques and advice for drilling into metal.
List of recommended accessories and attachments for the tool.
