To Next PageTo Next Page
Need help?Do you have a question about the Makita DGA452 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Wheel Diameter | 115 mm |
| No Load Speed | 10, 000 RPM |
| Battery Type | Lithium-Ion |
| Spindle Thread | M14 x 2 |
| Weight | 2.3 kg |
| Overall Length | 317 mm |
| Net Weight | 2.3 kg |
| Arbor Size | 22.23 mm |
Lists compatible battery cartridges and chargers for the tool models.
Details portable power packs for corded operation.
Explains the meaning of various symbols used in the manual.
General safety precautions applicable to all power tools.
Specific safety instructions for operating cordless angle grinders.
Explains kickback and how to prevent it during operation.
Safety guidelines for grinding and cutting-off applications.
Safety precautions for performing sanding operations with the tool.
Safety instructions for wire brushing applications.
Critical safety guidelines for handling and using Makita battery cartridges.
Provides advice on how to maximize the lifespan of the battery cartridge.
Step-by-step instructions for inserting and removing the battery.
How to check the current charge level of the battery.
Explains the built-in protection systems that prevent damage and ensure safety.
Describes the safety feature preventing unintended startup.
Explains the function of the shaft lock for accessory changes.
Instructions for attaching the auxiliary handle for better control.
Guide on fitting and removing protective wheel guards.
Steps for mounting depressed center wheels and flap discs.
Instructions for fitting and removing flex wheels for specific applications.
Guide for mounting and dismounting abrasive discs.
How to install abrasive cut-off and diamond wheels.
Important warnings and cautions before and during tool operation.
Procedures and techniques for grinding and sanding.
Guidelines for using the tool with cut-off or diamond wheels.
Instructions for operating the tool with a wire cup brush.
Instructions for operating the tool with a wire wheel brush.
Guidance on using the tool as a hole cutter.
How to clean the tool's air vents to ensure proper function.
Step-by-step guide for replacing worn carbon brushes.
Lists and describes recommended optional accessories for the tool.
