Makita DGA463 User Manual

INSTRUCTION MANUAL
Cordless Angle Grinder
DGA411, DGA412, DGA413, DGA414
DGA461, DGA462, DGA463, DGA464
DGA511, DGA512, DGA513, DGA514
ENGLISH: Original instructions
Read before use.

Makita DGA463 Specifications

General

Type	Angle Grinder
Battery Voltage	18V
Wheel Diameter	115 mm
No Load Speed	8, 500 rpm
Disc diameter	115 mm
Spindle thread	M14

Summary

Angle Grinder Safety Warnings

Power and Battery Use and Care

Power Tool Use and Care

Battery Tool Use and Care

Angle Grinder Kickback Warnings

Battery Safety Instructions

Battery Status and Protection

Tool/Battery Protection System

Operation Modes

Wheel Guard Installation

Grinding and Sanding Operation

Wireless Activation Troubleshooting

Tool Maintenance

Hammer Drill Safety Warnings

Personal Safety Precautions

Advice for operator safety and protective measures.

Hammer Drill Specific Safety

Cordless Hammer Driver Drill Safety Warnings

Specific safety advice for the hammer driver drill.

Hammer Drill Torque and Modes

Selecting the Action Mode

Adjusting Fastening Torque

Hammer Drilling Operation

Circular Saw Safety Warnings

Cutting Procedures

Specific safety instructions for cutting operations.

Kickback Causes and Warnings

Critical safety information regarding saw kickback.

Lower Guard Function

Saw Blade Installation

Circular Saw Operation

Circular Saw Adjustments

Adjusting Cut Accuracy

Impact Driver Safety Warnings

General Power Tool Safety

Provides general safety guidelines for all power tools.

Cordless Impact Driver Safety Warnings

Specific safety advice for the impact driver.

Impact Driver Operation