Need help?Do you have a question about the Makita DHR171 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Impact Energy | 1.2 J |
| No Load Speed | 0 - 680 RPM |
| Blows per Minute | 0 - 4, 800 BPM |
| Max Drilling Capacity in Concrete | 17 mm |
| Max Drilling Capacity in Steel | 10 mm |
| Max Drilling Capacity in Wood | 13 mm |
| Battery Type | Lithium-Ion |
| Vibration: Hammer Drilling | 9.0 m/s² |
| Tool Length | 273 mm (10-3/4") |
The tool is designed for hammer drilling and drilling in various materials.
Guidelines for maintaining a safe work environment.
Precautions related to electrical hazards and EMF.
Measures to ensure operator safety during use.
Guidelines for proper operation, maintenance, and storage of the tool.
Instructions for safe charging, use, and storage of battery packs.
Instruction to stop immediately if battery life is significantly reduced.
Immediate action required if battery electrolyte contacts eyes.
Measures to prevent short-circuiting battery terminals and causing hazards.
Avoid storing the tool and battery where temperatures exceed 50°C.
Warnings against incinerating, dropping, striking, or using damaged batteries.
Step-by-step guide for safely installing and removing the battery pack.
Guidance on operating the reversing switch for rotation control.
Instructions for changing the tool's operating mode.
How to select and use the hammering mode for concrete drilling.
How to select and use the rotation-only mode for drilling.
Steps for securely attaching the auxiliary side grip.
Procedure for inserting and removing drill bits, including securing check.
Always use side grip and secure workpiece before operation.
Safety and technique for hammer drilling, including hole breakthrough.
Technique and safety for drilling into wood or metal.
To Next Page
