To Next PageTo Next Page
Need help?Do you have a question about the Makita DHR241Z and is the answer not in the manual?
Instructions for performing hammer drilling in concrete, masonry, and stone.
Steps for using the tool in hammering-only mode for breaking up materials.
Procedure for drilling without impact in softer materials using a drill chuck.
General| Drilling | Yes |
|---|---|
| Chuck type | SDS Plus |
| Product color | Black, Green |
| Number of gears | 3 |
| Power protection features | Overload, Deep discharge, Overheating |
| Power source | Battery |
| AC input voltage | 18 V |
| Battery capacity | 1.3 Ah |
| Idle speed (max) | 4000 RPM |
| Sound power level | 97 dB |
| Impact energy (max) | 2 J |
| Sound pressure level | 86 dB |
| Drilling diameter in wood (max) | 26 mm |
| Drilling diameter in steel (max) | 13 mm |
| Vibration level (hammer drilling) | 12.5 m/s² |
| Drilling diameter in concrete (max) | 20 mm |
| Optimum drilling diameter (concrete) | 6 - 10 mm |
Weight and Dimensions| Depth | 84 mm |
|---|---|
| Width | 417 mm |
| Height | 219 mm |
| Weight | 4000 g |
