What to do if my Makita Power Tool has unusual dust emission?
If your Makita Power Tool is emitting an unusual amount of dust, it could be due to a full dust container. Try emptying the dust container. Alternatively, the sealing cap might be worn or damaged, in which case you should replace it.
General| Type | Rotary Hammer |
|---|---|
| Voltage | 18V |
| Impact Energy | 2.0 J |
| No Load Speed | 0 - 950 RPM |
| Blows per Minute | 0 - 4, 700 BPM |
| Max Drilling Capacity in Concrete | 24 mm |
| Max Drilling Capacity in Steel | 13 mm |
| Max Drilling Capacity in Wood | 27 mm |
| Chuck Type | SDS-Plus |
| Battery Type | Lithium-Ion |
| Weight | 3.4 kg |
Explains symbols used on the equipment for clear understanding.
Defines the specific applications and purposes of the tool.
Details noise levels and vibration emission values for different work modes.
States compliance with relevant European directives and standards.
Guidelines for safe and effective use and maintenance of power tools.
Specific guidelines for using and maintaining battery-powered tools.
Crucial safety precautions for operating the cordless rotary hammer.
Critical safety rules for handling and storing the battery cartridge.
Recommendations to prolong the lifespan and performance of the battery.
Step-by-step guide for inserting and removing the battery.
Explains the system that protects the tool and battery from overload or low voltage.
How to operate the main switch and the reversing switch for rotation control.
Instructions for exchanging SDS-plus chuck with a drill chuck.
Guide to choosing between hammering, rotation, and hammering modes.
Explains the function of the torque limiter and when it actuates.
How to properly attach and position the auxiliary side handle.
Guidance on applying bit grease and securely installing bits.
How to set the desired angle for the bit in chipping/demolition modes.
Step-by-step instructions for performing hammer drilling.
How to use the depth gauge for drilling holes of uniform depth.
Using dust control accessories for cleaner operation.
Instructions for operating the tool in chipping or demolition modes.
Procedures for drilling into materials like wood and metal.
General guidelines for tool inspection, cleaning, and repairs.
List of recommended accessories for enhanced tool functionality.
To Next Page
