To Next PageTo Next Page
Need help?Do you have a question about the Makita DHS680Z and is the answer not in the manual?
General| Power source | Battery |
|---|---|
| Battery voltage | 18 V |
| Blade diameter | 165 mm |
| Bevel adjustment | - |
| Idle speed (max) | 5000 RPM |
| Sound power level | 94 dB |
| Cutting depth (45º) | 41 mm |
| Cutting depth (90º) | 57 mm |
| Sound pressure level | 83 dB |
| Sound level uncertainty | 3 dB |
| Quantity | 1 |
| Castor wheels | Yes |
| Uncertainty K | 1.5 m/s² |
| Saw blade type | Single blade |
| Angle setting type | Stepless |
| Vibration emission | 2.5 m/s² |
| Angle setting range | 0 - 50 ° |
| Product color | Green |
| Power protection features | Overcharge, Overload |
Weight and Dimensions| Depth | 170 mm |
|---|---|
| Width | 350 mm |
| Height | 236 mm |
| Weight | 3300 g |
| Blade thickness | 20 mm |
Specific safety warnings for the cordless circular saw operation.
Instructions and precautions for safe and effective cutting operations.
Instructions on checking and operating the saw's lower guard for safety.
Further safety precautions and guidelines for using the power tool.
Recommendations for optimizing the lifespan and performance of the battery.
Step-by-step guide for inserting and removing the battery pack from the tool.
Explanation of how to operate the switch trigger and lock-off lever.
How to interpret battery indicator lights to check charge level.
Details on the tool's automatic stop mechanism when overloaded.
Information on automatic stop due to overheating and cooling.
Procedure to release the tool's lock after protection system activation.
Instructions on setting and securing the cutting depth for optimal results.
Guidance on performing angled cuts using stoppers and adjusting the bevel guide.
How to align the tool's base with the cutting line for straight and angled cuts.
Instructions on how to use the tool's built-in lamp for illumination.
Information on how to use and store the tool's hanging hook.
Detailed steps for safely replacing the saw blade, including tightening.
Guidance on correctly mounting saw blades using different types of inner flanges.
Instructions on storing the hex wrench to prevent loss.
Steps to connect a vacuum cleaner for dust extraction during cutting.
Guidelines for safe and effective forward movement and tool handling during cuts.
How to use the rip fence for accurate straight and uniform width cuts.
Instructions for cleaning guards and general tool upkeep.
Procedure for fine-tuning the 0° and 45° cut angles.
How to adjust the bevel guide for precise angle settings.
List of recommended accessories for use with the tool.
Information on noise levels and the need for hearing protection.
Details on vibration emission values and safety measures.
